{"title":"MXLR","description":null,"products":[{"product_id":"mxlr-max-13-001-fan-booster","title":"MXLR - MAX-13-001 - FAN BOOSTER","description":"\u003cp\u003eOur MXLR FAN BOOSTER is designed to level up your cooling game! \u003cbr\u003eSimply connect the FAN BOOSTER via the JR Servo Plug with your receiver, plug your Fan into the FAN BOOSTER and experience the difference!\u003cbr\u003e\u003cbr\u003eThis small device transforms the 6V of your receiver to 8V output, which will increase the speed of your fan and by this the cooling ability! This leads to less fading, more consistency and by this more speed over run time. Simple huh ? \u003cbr\u003e\u003cbr\u003eThe MXLR FAN BOOSTER comes in a lightweight alloy case, with one JR Servo Plug to connect to the receiver and one female JST connector to plug in the fan. Clearly all wires and plugs are black! \u003cbr\u003eThe unit weights 4,5g. and has the following case dimensions: \u003cbr\u003e24,20mm long \/ 13,20mm wide \/ 6,2mm high\u003cbr\u003eWire legth: 29,50mm (to receiver) \/ 41,50mm (fan connector)\u003cbr\u003eMax Voltage input: 8.0V \u003cbr\u003eMin Voltage input: 4.0V\u003cbr\u003e\u003cbr\u003eIMPORTANT NOTICE: \u003cbr\u003e- make sure your used cooling fan can work\/operate at 8,0V !!!\u003cbr\u003e- always check the polarity before plugging in the booster \/ fan !!!\u003cbr\u003e- we recommend to use this FAN BOOSTER only with ESC's that provide stable BEC voltage !!! \u003c\/p\u003e\n\u003cp\u003eMAX-13-001 contains:\u003cbr\u003e1x MXLR FAN BOOSTER\u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":52424318681220,"sku":"99-MAX-13-001","price":19.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-13-001-1.jpg?v=1782866001"},{"product_id":"mxlr-max-03-007-tungsten-cube-balance-weight-5g","title":"MXLR - MAX-03-007 - Tungsten Cube Balance Weight - 5g","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":52424318648452,"sku":"MAX-03-007","price":10.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/picture-1600.jpg?v=1782866001"},{"product_id":"mxlr-flexbumper-for-mugen-mtc3","title":"MXLR FlexBumper for Mugen MTC3.","description":"\u003cp\u003ehe MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility!\u003cbr\u003eYou may ask what are the advantages over foam bumpers? We can answer that:\u003cbr\u003e- absorbs hits better and doesn't transfer them as much into the chassis structure\u003cbr\u003e- more robust and sturdy\u003cbr\u003e- it always goes back to original shape and don't drag on the floor after a crash\u003cbr\u003e- improved style\/optics :-)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur MXLR FlexBumper for the Mugen MTC3 matches the original footprint, but with a lower overall profile!\u003cbr\u003eIt's a direct replacement for the kit foam! The lower overall profile helps to keep the weight in an acceptable range.\u003cbr\u003eThere are two MX logos on the backside to proof the originality.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWeight information:\u003cbr\u003eMXLR FlexBumper = ~9,5g.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMAX-09-023 contains:\u003cbr\u003e1x MXLR FlexBumper for Mugen MTC3\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":52424319205508,"sku":"MAX-09-027","price":18.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-09-027_1_small_6b757810-b336-4f72-8204-426cbff0ba01.jpg?v=1782866007"},{"product_id":"mxlr-max-03-006-tungsten-balance-weight-5g","title":"MXLR - MAX-03-006 - Tungsten Balance Weight - 5g","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":52424319271044,"sku":"99-MAX-03-006","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-03-006-1.jpg?v=1782866008"},{"product_id":"mxlr-max-09-010-flexbumper-for-tamiya-tt-01-tt-02-small","title":"MXLR - MAX-09-010 - FlexBumper for Tamiya TT-01 \/ TT-02 - SMALL","description":"\u003cp\u003eThe MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility!\u003cbr\u003eYou may ask what are the advantages over foam bumpers? We can answer that:\u003cbr\u003e- absorbs hits better and doesn't transfer them as much into the chassis structure\u003cbr\u003e- more robust and sturdy\u003cbr\u003e- it always goes back to original shape and don't drag on the floor after a crash\u003cbr\u003e- improved style\/optics :-)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur MXLR FlexBumper for the Tamiya TT01 \u0026amp; TT02 matches the original footprint of the #51019 \"S\" bumper. It's a direct replacement for the kit foam. The MX logo on the front side of the bumper proof the originality.\u003c\/p\u003e\n\u003cp\u003eWeight: ~15g.\u003cbr\u003e\u003cbr\u003eMAX-09-010 contains:\u003cbr\u003e1x MXLR FlexBumper for Tamiya TT01 \u0026amp; TT02 (small)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.\u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":52424319238276,"sku":"99-MAX-09-010","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-09-010-3.jpg?v=1782866008"},{"product_id":"mxlr-max-03-009-tungsten-balance-weight-12g","title":"MXLR - MAX-03-009 - Tungsten Balance Weight - 12g","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":52424319303812,"sku":"99-MAX-03-009","price":18.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-03-009-1.jpg?v=1782866008"},{"product_id":"mxlr-m-flexbumper-for-awesomatix-a800r-a800rr","title":"MXLR M-FlexBumper for Awesomatix A800R \/ A800RR","description":"\u003cp\u003eThe MXLR \u003cstrong\u003eM-FlexBumper\u003c\/strong\u003e is a weight optimized version of our hyper popular FlexBumper.\u003cbr\u003eOur goal was to offer a lighter version which remains stable and strong enough for best performance - and\u003cbr\u003ewith our new \"M-shape\" we managed it! \u003cbr\u003e\u003cbr\u003eWith ~8,8g weight the new M-FlexBumper version is more than 3g lighter than our std. FlexBumper version (which will remain active in our portfolio as well!), and only 3g. heavier than the kit foam bumper!\u003c\/p\u003e\n\u003cp\u003eYou may ask what are the advantages over foam bumpers? We can answer that:\u003cbr\u003e- absorbs hits better and doesn't transfer them as much into the chassis structure\u003cbr\u003e- more robust and sturdy\u003cbr\u003e- it always goes back to original shape and don't drag on the floor after a crash\u003cbr\u003e- improved style\/optics\u003c\/p\u003e\n\u003cp\u003eOur MXLR M-FlexBumper for the Awesomatix A800R\/RR \u0026amp; A800FXR matches the original footprint, but with a lower overall profile! It's a direct replacement for the kit foam. \u003cbr\u003eThere are two MX logos on the backside to proof the originality. \u003cbr\u003eAlso suitable for all A700 models, as well as A800, A800X, A800X Evo, A800MMCX, A800MMX!\u003c\/p\u003e\n\u003cp\u003eIMPORTANT: The M-FlexBumper is optimized for high competition use where every gram counts. \u003cbr\u003eClearly - this version is less crash resistant in case of accidents than the std. FlexBumper! \u003cbr\u003ePlease store the bumper (as spare or installed in the car) on a flat ground, and avoid to store it squeezed or under load\/pressure! \u003c\/p\u003e\n\u003cp\u003eWeight comparison:\u003cbr\u003eMXLR FlexBumper = ~8,8g.\u003cbr\u003eOriginal Kit Bumper = ~6g.\u003c\/p\u003e\n\u003cp\u003eMAX-09-025 contains:\u003cbr\u003e1x M-FlexBumper for Awesomatix A800 series (MMX\/R\/RR\/FXR etc.)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products.\u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":52424319369348,"sku":"MAX-09-025","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-09-025-4.jpg?v=1782866008"},{"product_id":"mxlr-max-03-008-tungsten-balance-weight-10g","title":"MXLR - MAX-03-008 - Tungsten Balance Weight - 10g","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":52424319336580,"sku":"99-MAX-03-008","price":15.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-03-008-2.jpg?v=1782866008"},{"product_id":"mxlr-max-03-010-tungsten-balance-weight-15g-brick","title":"MXLR - MAX-03-010 - Tungsten Balance Weight - 15g - BRICK","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":52424319402116,"sku":"99-MAX-03-010","price":15.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-03-010-2.jpg?v=1782866008"},{"product_id":"mxlr-max-03-011-tungsten-balance-weight-15g-esc","title":"MXLR - MAX-03-011 - Tungsten Balance Weight - 15g - ESC -","description":"\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cspan\u003eThe weight distribution of a car is one of the most powerful setup options that most racers overlook!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpace to place weights in an RC-Car is very limited. Using high-density material, such as Tungsten, it's possible to place more weight even with less room. Main goal for weight placement in race cars = AS LOW AS POSSIBLE! \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eWith our new MXLR Tungsten Weights range we cover all the racers needs! No matter if the smallest 5g. cube weight to stick between electronics in a 1\/12 scale car, or the big 20g. ESC plate - we got you covered. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eRound corners as well as polished surfaces with laser engraving on the topside for easy identification of the weight underline the high quality of our Tungsten Weights. For the installation we recommend to use a thin double sided tape (0.1-0.2mm).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eTHE FULL RANGE: \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-006 - Tungsten Balance Weight 5g. --\u0026gt; 9.5x9.5x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-007 - Tungsten Balance CUBE 5g. --\u0026gt; 6.5x6.5x6.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-008 - Tungsten Balance Weight 10g. --\u0026gt; 18.0x10.0x3.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-009 - Tungsten Receiver Weight 12g. --\u0026gt; 21.0x21.0x1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-010 - Tungsten BRICK 15g. --\u0026gt; 5.0x6.0x26.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-011 - Tungsten ESC Weight 15g. --\u0026gt; 32.0x26.0x1.0mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eMAX-03-012 - Tungsten ESC Weight 20g. --\u0026gt; 32.0x26.0x1.5mm\u003c\/span\u003e\u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":52424319533188,"sku":"99-MAX-03-011","price":21.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-03-011-1.jpg?v=1782866008"},{"product_id":"mxlr-fan-holder-for-a12","title":"MXLR Fan Holder for A12","description":"This is the final version of the prototype Fan Holder which Max Mächler used to win the 2023 1\/12 SPEC World Champion Title! The use of a 30mm Fan, powered by 6,0V from the Receiver, was definitely not a disadvantage! \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIt's not easy to fit such a big and strong Fan into the A12 but using smaller than 30mm wasn't an option at all, as we don't like to sacrifice performance! At the worlds Max used a heavily modified Fan to clear with the bodyshell. After several more tests and versions we finally found a suitable way which doesn't require as much modification, if any at all! We moved the Fan more forward and mounted it way steeper on the holder. The key to still get a great air flow were the small side dams! \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe result by using our Fan Holder with a strong 30mm Fan at 6,0V is a much lower Motor temperature. \u003cbr data-mce-fragment=\"1\"\u003eDepending on the track layout and grip conditions, it reduces the temperature by 12-18 degree Celsius! \u003cbr data-mce-fragment=\"1\"\u003eThis leads to the option of using more timing at the motor and\/or longer rollout, which means more speed! \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOur MXLR Fan Holder is 3D printed with relatively durable material which is able to absorb impacts to a certain degree. So far, we didn't see any broken holders at all. But we say it again - in the end its 3D printed and not machined or molded, which means there are chances it can break!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIt was our goal to design it as light and at the same time as strong as possible. Without Fan and screws it weighs only 2,6g. We recommend using M3x12mm Alloy screws (not included) for the installation of a 30mm Fan (not included).\u003cbr data-mce-fragment=\"1\"\u003eTIP: Don't over tighten the screws, it's just plastic ;-)\u003cbr data-mce-fragment=\"1\"\u003eThe full assembly of the Fan Holder is around ~12g. depending on the actual Fan used.\u003cbr data-mce-fragment=\"1\"\u003eFor the installation on the side wings of the car you will need longer M3x12mm screws (not included).\u003cbr data-mce-fragment=\"1\"\u003eDepending on your Battery type and used shims under the side wings of your A12, you may need some additional shims (not included) for height adjustment of the Fan Holder. When using the MXLR Fan Holder you eventually don't use the OR230 Battery O-Ring, as the Fan Holder itself secures the Battery.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eDepending on the mounting position and the height setup of the bodyshell, the Fan should clear and don't touch the Polycarbonat. In our tests with the currently most used LMP shells like AMR, Ponente and M20 we performed only for the M20 small modifications on the Fan by sanding the top edges. With GT style bodyshells there should be no issues at all. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMAX-09-019 contains:\u003cbr data-mce-fragment=\"1\"\u003e1x Fan Holder for Awesomatix A12\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":67612292153476,"sku":"MAX-09-019","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/Screenshot2024-03-17at09-23-57MXLR-MAX-09-019-FanHolderforAwesomatixA12.png?v=1791249059"},{"product_id":"mxlr-max-09-020-fan-holder-for-awesomatix-a12x","title":"MXLR - MAX-09-020 - Fan holder for Awesomatix A12X","description":"\u003cdiv class=\"product--description\" itemprop=\"description\"\u003e\n\u003cp\u003eMax MXLR is behind Max Mächler - an internationally successful RC racer. \u003cbr\u003eHigh Quality and Max Exclusive Products - Engineered in Germany. \u003cbr\u003eEach product has been carefully selected and developed. \u003cbr\u003eNo blunt relabeling - but quality as Max uses it everyday life on the race tracks of this world!\u003c\/p\u003e\n\u003cp\u003eThis is the updated version of the prototype that Max Mächler used in his World Championship victory 2023 - adapted to the new requirements of the new Awesomatix A12X.\u003cbr\u003eThe use of a 30mm fan - fed with 6V from the receiver - was definitely no downside!\u003cbr\u003e\u003cbr\u003eIt is not easy to integrate such a large and strong fan in the A12 - but smaller fans than 30mm were no option because no performance should be lost. At the World Championships himself, Max used a very significantly modified fan to get it under the body. After several tests and other versions, a solution was found that was hardly any modification. The fan was further set forward and attached steeper to the holder. The key to success to get the air flow where it is supposed to go are the small side covers.\u003c\/p\u003e\n\u003cp\u003eThe result of using this holder together with a 30mm fan at 6.0V voltage is a significantly reduced motor temperature.\u003cbr\u003eDepending on the track layout and the handle conditions, this construction reduces the temperature by 12-18°C.\u003c\/p\u003e\n\u003cp\u003eThe MXLR fan holder is 3D printed - made of a rather strongly resilient material which is able to absorb impacts up to a certain point.\u003cbr\u003eIn the tests, there were no defects in departures. In the end, however, there is a 3D printed part with the corresponding sensitivity - a risk of breaking on departure remains.\u003c\/p\u003e\n\u003cp\u003eThe goal was to coordinate the holder as lightly and at the same time resilient as possible. Without fans and screws, the part weighs only 2.6g. The use of M3x12mm aluminum screws is recommended (not included, but available at RCK) - in conjunction with a 30mm fan (also not included).\u003cbr\u003eTIP: Does not overturn the screws. It's just plastic!\u003cbr\u003eThe total weight is fully assembled at approx. 12.5g - depending on the fan used.\u003cbr\u003eLonger screws (M3x12mm, not included) are required for mounting on the lateral carbon plates.\u003cbr\u003eDepending on the rechargeable battery used and the shims below the plates, additional shims may be required (not included) to set the height of the fan holder. \u003cbr\u003eThe O-ring OR230 may not be needed to fix the battery because the fan holder itself holds the battery in place.\u003cbr\u003e\u003cbr\u003eDepending on the mounting position and the height of the body used, the fan should be able to run freely and should not touch the polycarbonate.\u003cbr\u003eIn tests with the most used car bodies (AMR, Ponente, M20), it was only necessary for the M20 to easily grind the corners of the fan away to get space. \u003cbr\u003eWith GT bodies there should be no space problems.\u003c\/p\u003e\n\u003cp\u003eMAX-09-020 contains: \u003cbr\u003e1x fan holder for Awesomatix A12X\u003c\/p\u003e\n\u003cp\u003eNote:\u003cbr\u003ePlease do not forget that this product is a product of a 3D printer. One can therefore see layers and lines of the material.\u003cbr\u003eMXLR strives for the best possible quality and therefore uses 3D printers which are also able to deliver them - however, a 3D printed part will always be different from a milled or injection part in the surface finish.\u003c\/p\u003e\n\u003cp\u003eNote: \u003cbr\u003eAdditional parts or cars can be shown on the figures of MXLR that are not included in the scope of delivery and should only represent the application with practical examples. These parts are not included in the delivery of the article. \u003cbr\u003eBefore using MXLR products, it is very important to read the general safety instructions. These are located on this page - as do the product instructions - as well as the product \u003ca href=\"https:\/\/www.maexler.com\/instructions\/\" data-link-type=\"external\" data-type=\"linkpicker\" rel=\"nofollow noopener\" target=\"_blank\"\u003einstructions:\u003c\/a\u003e \u003ca href=\"https:\/\/www.maexler.com\/instructions\/\" data-link-type=\"external\" data-type=\"linkpicker\" rel=\"nofollow noopener\" target=\"_blank\"\u003eINSTRUCTIONS\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":67612292415620,"sku":"MAX-09-020","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/Screenshot2024-08-06at14-25-00MXLR-MAX-09-020-FanholderforAwesomatixA12XRC-KleinKramStefanKlein.png?v=1791249150"},{"product_id":"mxlr-flex-bumper-for-a12-wc-x-edition","title":"MXLR Flex Bumper for A12 WC\/X Edition","description":"The WC Edition of our A12 FlexBumper is the final version of the test part that Max Mächler used in his IFMAR World Championship winning A12! With an increased width of 18mm and extended depth of 4mm we achieved a way better support for the bodyshells, which plays a key role when using the popular ultra-light versions.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eActually this new style bumper takes over the role for the front body height adjustment , as the bodyshell rests completely on the bumper itself! With the three included spacers (1.0mm \/ 1.5mm \/ 2.0mm) it's rather easy to get the height setting perfect. Just place them under the bumper, directly on the Carbon Bumper plate of the A12! \u003cbr data-mce-fragment=\"1\"\u003eAt our tests in Europe and in the United States we found that these three different thickness spacer are suitable to get the correct bodyshell height settings by either using a single piece or stacking them up. We imprinted the thickness at different spots on each spacer to have a quick and easy count for the overall thickness when looking from above! \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength and flexibility!\u003cbr data-mce-fragment=\"1\"\u003eYou may ask what are the advantages over foam bumpers? We can answer that: \u003cbr data-mce-fragment=\"1\"\u003e- absorbs hits better and doesn't transfer them as much into the chassis structure\u003cbr data-mce-fragment=\"1\"\u003e- more robust and sturdy \u003cbr data-mce-fragment=\"1\"\u003e- it always goes back to original shape and don't drag on the floor after a crash \u003cbr data-mce-fragment=\"1\"\u003e- improved style\/optics :-) \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWeight comparison: \u003cbr data-mce-fragment=\"1\"\u003eMXLR FlexBumper = ~5,0g.\u003cbr data-mce-fragment=\"1\"\u003eOriginal Kit Bumper = ~3,5g.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eInstallation \/ Mounting tip:\u003cbr data-mce-fragment=\"1\"\u003eWe recommend to remove the SH1.5mm alloy spacer between the C1205 Suspension plate and the C1204 Bumper plate. By this the Bumper plate will sit higher and is less prone for rubbing.\u003cbr data-mce-fragment=\"1\"\u003eUse the different height printed spacers to adjust the FlexBumper height and by this the front bodyshell height.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eMAX-09-017 contains:\u003cbr data-mce-fragment=\"1\"\u003e1x MXLR FlexBumper for Awesomatix A12 WC Edition\u003cbr data-mce-fragment=\"1\"\u003e1x 1.0mm Spacer for A12 WC Edition FlexBumper\u003cbr data-mce-fragment=\"1\"\u003e1x 1.5mm Spacer for A12 WC Edition FlexBumper\u003cbr data-mce-fragment=\"1\"\u003e1x 2.0mm Spacer for A12 WC Edition FlexBumper","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":67612292448388,"sku":"MAX-09-017","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/Screenshot2024-03-17at09-27-57MXLR-MAX-09-017-FlexBumperforAwesomatixA12WCEdition.png?v=1791249150"},{"product_id":"mxlr-max-09-018-spacer-set-for-a12-wc-edition-flexbumper-set-of-3","title":"MXLR - MAX-09-018 - Spacer Set for A12 WC Edition FlexBumper (set of 3)","description":"\u003cp\u003eSpacers spare part set for the A12 WC Edition FlexBumper.\u003c\/p\u003e\n\u003cp\u003eMAX-09-018 contains:\u003cbr\u003e1x 1.0mm Spacer for A12 WC Edition FlexBumper\u003cbr\u003e1x 1.5mm Spacer for A12 WC Edition FlexBumper\u003cbr\u003e1x 2.0mm Spacer for A12 WC Edition FlexBumper\u003cbr\u003e\u003cbr\u003eSidenote: Don't forget, this product is made by a 3D printer. It means you are able to see layers and lines from the material! We strive for the best quality our printers are able to deliver. Still you need to keep in mind that 3D printed parts are not the same standard as machined or molded products. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":67612292513924,"sku":"99-MAX-09-018","price":8.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-09-018-4.jpg?v=1791249150"},{"product_id":"mxlr-max-02-006-tirefinisher-sanding-paddle","title":"MXLR - MAX-02-006 - TireFinisher - Sanding Paddle","description":"\u003cp\u003eEver wondered how to get your foam tires perfectly prepared to work from the first lap?\u003cbr\u003eThe answer is the \u003cstrong\u003eMXLR TireFinisher Sanding Paddle\u003c\/strong\u003e, which is handily equipped with four different diamond grid areas!\u003cbr\u003eOne tool to finish off a perfect tire after you cut\/trued it to the desired size.\u003cbr\u003e\u003cbr\u003eBut it isn't only handy for foam tires - also perfect for rubber tires to remove or adjust sidewall glue! \u003cbr\u003eA must have for every serious driver that wants to get the best out of his tires. \u003cbr\u003e\u003cbr\u003eThe four different grids: \u003cbr\u003e#120 - perfect to trim\/sand down the sides of your foam tires\/rim.\u003cbr\u003eAlso perfect to remove CA glue from the sidewalls of rubber tires.\u003cbr\u003e#240 - best choice for rounding of the edges on foam tires.\u003cbr\u003e#320 - optimal grid to smoothen the top surface of any type foam tires.\u003cbr\u003e#1000 - FINISHER, the final step to make your foam tire game perfect from the first corner.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eATTENTION:\u003c\/strong\u003e\u003cbr\u003eTo avoid any misunderstandings: This comes with ONE tool that offers a total of FOUR different grits on TWO sides.\u003cbr\u003eWith a single tool, you can cover all four areas without needing four different tools.\u003cbr\u003eThe images show multiple tools at once to show all four grits in one image.\u003cbr\u003eThe wheels shown are also not included.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":67612292481156,"sku":"99-MAX-02-006","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-02-006-6.jpg?v=1791249150"},{"product_id":"max-02-008-mxlr-rimfinisher-1-12-sanding-tool","title":"MAX-02-008 MXLR RimFinisher 1\/12 Sanding Tool","description":"\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003e👉\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003eMAX-02-008 MXLR RimFinisher 1\/12 Sanding Tool\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eThe MXLR RimFinisher is a simple tool to remove mold seams on 1\/12 rims to guarantee a flat surface for perfect mounting on the axle hubs. Two to three turns with very slight force and all the unwanted seams are gone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eWith an outer diameter of ~35,50mm the RimFinisher fits basically all modern times 1\/12 rear rims, and most of current 1\/12 front rims. There are very few exceptions for the front, when the wheel OD is too small\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eLightweight 3D printed sanding block with MXLR World Logo on top.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan lang=\"EN-US\"\u003eEach set comes with 5 sanding disc's which feature double sided tape on the backside for easy and simple installation on the sanding block.\u003c\/span\u003e\u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"Default Title","offer_id":67612292546692,"sku":"99-MAX-02-008","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-02-008_1.jpg?v=1791249150"},{"product_id":"mxlr-slow-mo-damping-grease-15g","title":"MXLR - SLOW-MO - Damping Grease - (15g)","description":"\u003cp\u003eOur MXLR SLOW-MO Damping Grease is the first choice when it comes to KingPin front ends of 1\/12 PanCars, Pro10 or F1. No Fade. No Separation. No Guesswork! Super smooth and ultra stable viscosity! \u003c\/p\u003e\n\u003cp\u003eThis isn't \"just another grease\" - it went a lot of testing and development into the formula to reach the best consistency, correct stickyness and range between the different available hardness levels. \u003cbr\u003eWe focused a lot to find the best micro-adhesion that the grease stays in place to provide consistent damping over the full travel range. Simple oils and greases mostly can't provide this.\u003cbr\u003e\u003cbr\u003eOur range from 3k to 80k will cover all track conditions you may face! \u003cbr\u003eOur recommendation:\u003cbr\u003e- thicker grease to slow down steering response and overall easier handling.\u003cbr\u003e- thinner grease for a more aggressive handling with more response. \u003cbr\u003e\u003cbr\u003eSuitable for a wide range of applications and fields:\u003cbr\u003e- KingPin Frontends\u003cbr\u003e- Side Tubes\u003cbr\u003e- Friction Dampers\u003cbr\u003e- Differentials\u003cbr\u003e\u003cbr\u003eSLOW-MO Damping Grease comes in a clear 15g. container which keeps the grease clean and in perfect condition during storage in your RC bags. \u003c\/p\u003e\n\u003cp\u003eMXLR SLOW-MO Damping Grease: Blue\u003cbr\u003eMAX-01-007 MXLR SLOW-MO Damping Grease 10K - Green\u003cbr\u003eMAX-01-008 MXLR SLOW-MO Damping Grease 15K - Orange\u003cbr\u003eMAX-01-009 MXLR SLOW-MO Damping Grease 20K - Blue\u003cbr\u003eMAX-01-010 MXLR SLOW-MO Damping Grease 25K - Pink\u003cbr\u003eMAX-01-011 MXLR SLOW-MO Damping Grease 30K - Red\u003cbr\u003eMAX-01-012 MXLR SLOW-MO Damping Grease 3K - Turquoise\u003cbr\u003eMAX-01-013 MXLR SLOW-MO Damping Grease 5K - Yellow\u003cbr\u003eMAX-01-014 MXLR SLOW-MO Damping Grease 8K - Purple\u003cbr\u003eMAX-01-015 MXLR SLOW-MO Damping Grease 40K - White\u003cbr\u003eMAX-01-016 MXLR SLOW-MO Damping Grease 50K - Milk Red\u003cbr\u003eMAX-01-017 MXLR SLOW-MO Damping Grease 60K - Milk Blue\u003cbr\u003eMAX-01-018 MXLR SLOW-MO Damping Grease 70K - Milk Green\u003cbr\u003eMAX-01-019 MXLR SLOW-MO Damping Grease 80K - Milk Yellow\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Team EAM, Inc","offers":[{"title":"3K Turquoise","offer_id":67612292579460,"sku":"MAX-01-012","price":19.0,"currency_code":"USD","in_stock":true},{"title":"5K Yellow","offer_id":67612292612228,"sku":"MAX-01-013","price":19.0,"currency_code":"USD","in_stock":true},{"title":"8K Purple","offer_id":67612292644996,"sku":"MAX-01-014","price":19.0,"currency_code":"USD","in_stock":true},{"title":"10K Green","offer_id":67612292677764,"sku":"99-MAX-01-007","price":19.0,"currency_code":"USD","in_stock":true},{"title":"15K Orange","offer_id":67612292710532,"sku":"99-MAX-01-008","price":19.0,"currency_code":"USD","in_stock":true},{"title":"20K Blue","offer_id":67612292743300,"sku":"99-MAX-01-009","price":19.0,"currency_code":"USD","in_stock":true},{"title":"25K Pink","offer_id":67612292776068,"sku":"99-MAX-01-010","price":19.0,"currency_code":"USD","in_stock":true},{"title":"30K Red","offer_id":67612292808836,"sku":"99-MAX-01-011","price":19.0,"currency_code":"USD","in_stock":false},{"title":"40K White","offer_id":67612292841604,"sku":"MAX-01-015","price":19.0,"currency_code":"USD","in_stock":true},{"title":"50K Milk Red","offer_id":67612292874372,"sku":"MAX-01-016","price":19.0,"currency_code":"USD","in_stock":true},{"title":"60K Milk Blue","offer_id":67612292907140,"sku":"MAX-01-017","price":19.0,"currency_code":"USD","in_stock":true},{"title":"70K Milk Green","offer_id":67612292939908,"sku":"MAX-01-018","price":19.0,"currency_code":"USD","in_stock":true},{"title":"80K Milk Yellow","offer_id":67612292972676,"sku":"MAX-01-019","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/files\/MAX-01-007.jpg?v=1791249151"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1668\/8659\/collections\/486059355_1145792110892763_2494023837266327226_n.jpg?v=1791249548","url":"https:\/\/westcoastrcworks.us\/collections\/mxlr.oembed","provider":"West Coast R\/C Works","version":"1.0","type":"link"}